Maschinen

2005 Streckblasmaschine BLOMAX 16 Serie III

: 7582019

Guter Zustand Blomax Serie 3 Blasmaschine mit Preformzuführung, Kühler und 3 Werkzeugsätzen. Im Jahr 2015 betriebsbereit gestoppt, noch installiert

Technical Details

  • Hersteller SIG Corpoplast
  • Hersteller-Typ Blomax 16, Series III
  • Gemacht im Jahr 2005
  • 22000 bph in 2.0 liters
  • Anwendung Streckblasformen von PET-Flaschen
  • Neck Standard PCO 1881 - 28 mm (short neck)
  • Number of cavities 16
  • Container sizes 0.5 to 2.5 liters
  • Preform feeding system Simonazzi
  • Total operating hours approx. 35000
  • Control PLC Siemens Simatic S7
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3 - Simonazzi Kipper
  • Blow Molder BLOMAX 16, serie 3 - Simonazzi preform feeding
  • Blow Molder BLOMAX 16, serie 3 - Simonazzi preform feeding
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3 - Simonazzi Kipper
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3 - Simonazzi Kipper
  • Blow Molder BLOMAX 16, serie 3 - Simonazzi preform feeding
  • Blow Molder BLOMAX 16, serie 3 - Simonazzi preform feeding
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3 - Simonazzi Kipper

Stretch Blow Molder BLOMAX 16 serie III – 2005 

This BLOMAX 16, Series III, PET bottle stretch blow molder system is in good condition and includes Simonazzi preform feeding system, chiller, evaporative cooler and 3 sets of molds. It was commissioned on 2005 and it is still installed and but cannot be tested. It has been regularly serviced strict in accordance with the manufacturer's guidelines. This is complete system for PET bottle blowing at capacity 22 000 bph, it has been blowing 1.5 liter and 2.5 liter bottles but it is suitable for bottles from 0.5 liters and 2.5 liters. It has currently neck standard PCO 1881 - 28 mm