Hyvin huollettu ja hyväkuntoinen pakkauskone eilaisten pullojen ja tölkkien pakkammiseen kartonki tarjottimelle ja kutisekalvoon. Koneella on pakattu 0.5 litran lasipulloja formaatissa 4 x 6, mutta tuotteen ja formaatin vaihto on helppo tehdä.
Tray Shrink Packer SMI SK 600 T
This tray shrink wrapper was made by Italian SMI in 2006. It is an automatic machine for packing plastic, metal, cardboard and glass containers. The machine packs containers on a carton pad, folds the pad into a tray and wraps a film around the pack and it is set up for glass bottles in typical formats. Corrugated cardboard pad or blank is picked from the blank magazine by a rotary picker equipped with two groups of vacuum suckers. The pad or the blank moves along the blank climb and places itself underneath the group of products. In the tray former, special mechanical devices fold the blank’s front and rear flaps. The side flaps are sprayed with hot melt glue and then folded as a tray. The machine has two film rolls and automatic change over then roll is empty. Unwinding device has a brushless motor, which ensures the constant tensioning of the film. The machine is equipment with a toll for reel changing. Before the pack enters the shrinking tunnel, the film is cut by a knife equipped with motorized blade and then wrapped around the group of containers. The control PLC is ready programmed for various packing formats. This machine installed and is ready for immediate delivery.