Erittäin hyvin pidetty PET linja jolla on täytetty ja pakattu olutta olutta se sopii myös muille hiilihapotetuille juomille. Linjalla on ajettu van noin 25000 tuntia.
Filling Line for Beer in PET bottles Krones – CBI 9000 bph
Complete PET filling line for beer, capacity 9000 bph in 2,0 ltr. PET bottles. This line was commissioned in 2004 by CBI and all other equipment are made in year 2003 / 2004 except the Ortmann + Herbst filler-rinser-capper which is originally made in 1985 but totally refurbished and renewed by CBI before line commissioning. Line is still installed and in operation and it is very well maintained
Watch videos of this line via these links
Filler Rinser: https://youtu.be/Tcw7uAmTl9Y
Blow molding: https://youtu.be/JQm4yw-4DA4
List of main equipment
High pressure compressor Atelier Francois including 40 bar air tank mounted on the frame, high pressure air dryer, control cabinet and cooling heat exchanger
Compressor type AF CE6 SG 40
Year of manufacturing 2003
Compressor capacity FAD 28.3 Nm3/min
Electric motor Schorch 315 kW/ 50 Hz, 350 kW/60 Hz
High pressure dryer Hankison HPET6-700W-AF-M
Cooling heat exhanger BAC F200
Preform feeding system VZT-2510 with semiautomatic box tipper and lifting elevator with a hopper
PET bottle stretch blow moulding machine KRONES Contiform with chiller
Manufacturer’s type Contiform S 12
Year of manufacturing 2004
Capacity up to 24000 (mechanical limit)
Moulds for 660, 1000 and 2000 ml
Control PLC Siemens S7 series
Operation panel 15 “ Krones iPanel colour touch screen
Frequency controllers Danfoss
Krones air conveyor, pneumatically adjustable for different bottle sizes, incl. blowing units
Rinsing-Filling-Capping block Ortmann + Herbst type 36 / 72 / 14 with 36 rinsing stations, 72 filing valves and 14 head Zalkin plastic screw capper, with Pick in Place system. UK based CBI made a very complete refurbishment for this unit in year 2003; all filling valves, main bearing with drive and filling control valves were replaced and new Zalkin capper and new Siemens S7 PLC controller with touch screen were added as well as new complete safety housing. Current filling capacity is 10 000 bph.
Level inspector Heuft Basic
Complete bottle conveyor system made by CBI connected with all machines, control PLC Siemens S7, manufactured in year 2003
Flash Pasteurizer AVE N 35 with buffer tank unit, year of manufacturing 2003
Bottle blowing station AIRKNIFE with two side channel blowers
Labelling machine Krones Contiroll 960
This labeller has one double reel-fed station for plastic wrap-around labels and one station for pre-cut paper labels. Plastic labels are precisely cut, wrapped around the body of the bottle and stripe glued with hotmelt glue. Pre-cut paper labels are introduced to the neck of the bottle and clued with cold clue. Label turrets are servo driven and will place labels in desired position on bottles. Labelling machine has Videojet Excell 170i data coder.
Year of manufacturing 2004
Manufacturers type Contiroll 960-16
Number of stations 2
Number or bottle turrets 11
Control PLC Siemens S7
Label inspector Heuft Spectrum TX with rejection system
Packaging machine DIMAC STAR
This machine has been packing only in shrink film but it can do alo pad + shrink film
Machine type STAR P60
Manufacturing year 2003
Capacity 60 pack / min
Control PLC Dimac
Complete pack conveyor system from outfeed shrinking machine to infeed palletizer
Palletizer made by CBI, low level type palletizer with empty pallet magazine, pallet conveyor system and Robopac Helix SH 40 pallet stretch wrapper. Control PLC is Siemens S7