Koneet ja laitteet

Pullonpuhalluskone BLOMAX 16 serie III – 2005

: 7582019

Hyväkuntoinen Blomax serie 3pullonpuhalluskone preformien syöttöjärjestelmällä, vedenjäähdyttimellä ja kolmella sarjalla puhallusmuotteja. Laite on pysäytetty täysin toimintakunnossa vuonna 2015 ja se on edelleen asennettuna

Technical Details

  • Valmistaja SIG Corpoplast
  • Valmistajan tyyppimerkintä Blomax 16, Series III
  • Valmistusvuosi 2005
  • Kapasiteetti 22000 bph in 2.0 liters
  • Tuoteryhmä PET pullon puhallus
  • Neck Standard PCO 1881 - 28 mm (short neck)
  • Number of cavities 16
  • Container sizes 0.5 to 2.5 liters
  • Preform feeding system Simonazzi
  • Total operating hours approx. 35000
  • Control PLC Siemens Simatic S7
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3 - Simonazzi Kipper
  • Blow Molder BLOMAX 16, serie 3 - Simonazzi preform feeding
  • Blow Molder BLOMAX 16, serie 3 - Simonazzi preform feeding
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3 - Simonazzi Kipper
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3 - Simonazzi Kipper
  • Blow Molder BLOMAX 16, serie 3 - Simonazzi preform feeding
  • Blow Molder BLOMAX 16, serie 3 - Simonazzi preform feeding
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3
  • Blow Molder BLOMAX 16, serie 3 - Simonazzi Kipper

Stretch Blow Molder BLOMAX 16 serie III – 2005  (3672015)

This BLOMAX 16, Series III, PET bottle stretch blow molder system is in good condition and includes Simonazzi preform feeding system, chiller, evaporative cooler and 3 sets of molds. It was commissioned on 2005 and it is still installed and but cannot be tested. It has been regularly serviced strict in accordance with the manufacturer's guidelines. This is complete system for PET bottle blowing at capacity 22 000 bph, it has been blowing 1.5 liter and 2.5 liter bottles but it is suitable for bottles from 0.5 liters and 2.5 liters. It has currently neck standard PCO 1881 - 28 mm